M12B-P90 1.6cc Single-Cylinder Water-Cooled Four-Stroke Gasoline Engine with Gear Reduction and Adjustable Speed

M12B-P90 1.6cc Mini Gasoline Engine Model with Gear Reducer Water-cooled Single-cylinder Four-stroke

Features:

– This is a mini single-cylinder four-stroke engine with a water-cooled heat dissipation structure and an adjustable speed carburetor.
– The unique and exquisite engine model is made of brass and stainless steel, with a reduction gear box that is more unique.
– The engine is fixed on a wooden base for easy placement and operation.

Engine Start Steps:

1. Check the engine wiring from the wooden base, connect the fuel tank tubing, and install 1.5V AA batteries.
2. Fill the fuel tank with 95 gasoline or zippo kerosene. After the filling is complete, place the flywheel on the right side of the engine (the surface of the power switch) rotates clockwise many times, which can make the mixed fuel completely enter the cylinder to ensure that there is no air in the fuel pipe.
3. Turn on the power switch, and then quickly turn the flywheel clockwise to move it to the right (Power switch surface) Start the engine.

Notes:
1. If the ignition device is normal and the cylinder compression is normal, the machine cannot start normally, it is likely to need to adjust the carburetor oil needle.
2. After tightening the main oil needle on the carburetor, loosen 1/ 4 laps and start the flywheel to make the mixing ratio of gasoline and air reach the normal working mixing ratio.
3. When the machine stops running, turn off the power switch.

Excellent Gift:
This exquisite engine model is not only a desktop decoration model, but also a model for collection. It is an excellent personalized gift for mechanical crafts model lovers.

If you have any questions about the product or usage problems, please contact us in time, and we will try our best to solve it for you.

Age: 14+

Specifications:
– Color: As Shown
– Material: Brass + Stainless Steel + Wood
– Engine Size: 95 x 85 x 97mm
– Wooden Base Size: 200 x 120 x 30mm
– Displacement: 1.6CC
– Cylinder Diameter: 13mm
– Stroke: 12mm
– Flywheel Diameter: 56mm
– Ignition Device Power Supply Voltage: AA batteries (not included)
– Starting Method: External force (electric drill) or hand pull start
– Fuel: Gasoline or zippo kerosene
– Product Dimensions: 20 x 12 x 12.7cm
– Product Weight: 1254g
– Package Dimensions: 25 x 25 x 25cm
– Package Weight: 1700g
– Packing: Box

Package Content:
– 1 x Engine
– 1 x Hand Puller
– 1 x Manual